Dodge County · Climate zone 6A

Manual D Duct Design in Beaver Dam, WI for $100.

Manual D duct design for Beaver Dam, WI: supply and return sizes per room, airflow, friction rate and total effective length, ready for the permit and the install crew. $100 with Manual J and S included.

  • J + S + D for $100
  • Permit-ready PDF
  • 2–3 business days
  • No subscription
Single-story new home ready for move-in
Manual J + S + D · $100 per house

Free quote confirmation, no account needed. You pay per house, no subscription.

Beaver Dam at a glance

Load calculations for Beaver Dam.

6A

Beaver Dam is in IECC climate zone 6A (cold, moist).

Long heating seasons. Cold-climate heat pumps or furnaces must be sized to the design heat loss, not to habit. Humid air: dehumidification and latent capacity must be checked in Manual S.

Climate zone by county (Dodge County) per the DOE / IECC county assignment. Your jurisdiction’s adopted code edition decides; we use the local design temperatures for the project address.

Population
16,443
County
Dodge County
IECC climate zone
6A
Area
7.4 sq mi

Builders and HVAC contractors in Beaver Dam use Manual J, S and D for new construction, additions and equipment changes. We use the design conditions for Beaver Dam, not a generic regional value.

Population: US Census Bureau estimates. Beaver Dam is a town in Dodge County, Wisconsin.

Pricing

J, S & D for $100 in Beaver Dam. All three.

One price for every builder and every contractor, from the first house. No subscription, no software license, no minimum order.

Full permit set

Manual J + S + D

$100 / house

All three reports for one house, matched to each other, in one PDF package.

Order for $100
Load calculation

Manual J

✓ included

Room-by-room heating and cooling loads (sensible and latent) to ACCA Manual J 8th Edition.

Equipment selection

Manual S

✓ included

Checks the furnace, heat pump or AC you plan against the Manual J loads and manufacturer data.

Duct design

Manual D

✓ included

Duct sizing per room: airflow (CFM), supply and return sizes, friction rate and static pressure.

$100 per dwelling unit for all three reports, also if you need only one of them. Confirmed before we start. Unusual projects (very large custom homes, more than two systems) are quoted first.

What you get

A report your plan reviewer recognizes.

Every report is built from your actual plans and the design conditions for Beaver Dam, and delivered as one PDF you can upload with the permit application.

Room by roomHeating, sensible and latent cooling load and airflow for every room.
Code referencesPrepared to ACCA Manual J 8th Edition, Manual S and Manual D.
Matched equipmentManual S check against manufacturer data for the unit you plan.
Duct sizesManual D supply and return sizes, friction rate and static pressure.

Example screen with sample numbers (heating / cooling Btu/h per room). Your report uses your plans.

Why Manual J

Square feet per ton is not a calculation.

Two houses with the same floor area can need very different equipment. Windows, orientation, insulation, air leakage, duct location and climate change the load. Codes require ACCA Manual J and Manual S because rules of thumb usually oversize.

Order a Manual J for $100

Oversized equipment short-cyclesMore wear, more noise, worse humidity control and a higher price for the unit.
Undersized equipment falls behindRooms cannot hold temperature on the hottest and coldest days, and callbacks follow.
Plan review wants the reportIRC M1401.3 and IECC R403.7 require Manual S sizing based on Manual J loads.
Built for the trade

For builders and HVAC contractors in Beaver Dam.

We work as your back office for load calculations: you build and install, we deliver the numbers and the paperwork.

Row of new homes in a growing subdivision

Home builders & developers

  • Manual J, S and D with every permit set
  • Same $100 price for one house or a whole subdivision
  • Repeat plans: we keep your models on file
  • One contact for all your projects
New two-story home nearly finished on a construction site

HVAC contractors

  • Size equipment right and win the bid on facts
  • Load calc for replacement permits and rebates
  • Manual D before the duct crew starts
  • No software license, pay only when you have a job

Partner program

How it works

Manual J in Beaver Dam in three steps.

  1. Send your plansAnswer four questions, then email or upload floor plans, elevations, window schedule and insulation specs.
  2. We calculateManual J loads, Manual S equipment check and Manual D duct design, matched to each other.
  3. Permit-ready PDFDelivered in 2–3 business days. If plan review asks for changes to our report, we revise it free.
Builder and contractor reviewing construction plans
Your plansPDF, CAD or photos of the plan set are fine.
Floor plan with a pen and ruler
Room by roomEvery room, window and wall entered from the plans.
Roof trusses of a new house against a blue sky
Ready before rough-inEquipment and ducts sized before the crews start.
What we need

Send the plan set. We do the rest.

  • Floor plans of every level with dimensions
  • Elevations or the direction the front door faces
  • Window and door schedule (sizes, U-factor, SHGC)
  • Insulation levels: walls, ceiling/attic, floor, slab or basement
  • Ceiling heights and any vaulted areas
  • Duct location (attic, crawlspace, conditioned space)
  • Planned equipment type: heat pump, AC + furnace, mini-split
  • Air leakage target if known (ACH50)

Missing something? We tell you before we start and use code minimums only if you confirm.

Floor plan with a pen and ruler
FAQ

Manual D Duct Design in Beaver Dam, answered.

What does a Manual D report include?

Design airflow for every room, supply and return duct sizes, the available static pressure and friction rate, and the longest run (total effective length). It is based on the blower data of the equipment you select.

Do you need to visit the site in Beaver Dam?

No. We work from your plans and specifications, so a project in Beaver Dam is handled remotely like any other. If a detail is missing, we ask before we start.

What climate zone is Beaver Dam in?

Beaver Dam is in Dodge County, which is assigned to IECC climate zone 6A. Your local building department’s adopted code edition is what counts, and we use the design temperatures for the project location.

How much does a Manual J cost?

$100 per house for Manual J, Manual S and Manual D together. No subscription and no minimum order.

How fast do I get the report?

Usually 2–3 business days after we receive complete plans and specs.

Will the building department accept it?

Reports follow ACCA Manual J 8th Edition, Manual S and Manual D and use the plans you send. Acceptance is up to your building department; if plan review asks for corrections to our report, we revise it at no charge.

Do you work with builders and contractors on many houses?

Yes. Builders and HVAC contractors are our main customers. The price stays $100 per house for J, S and D, and repeat plans are kept on file.

Sunny suburban street with new homes

Your next permit, sized right.

Manual J, S and D together for $100 in Beaver Dam. Send the plans today.

Order now
More in Beaver Dam

Other services in Beaver Dam.

Manual D Duct Design nearby

Manual D Duct Design in all of Wisconsin →

Order J + S + D · $100 →