North Slope Borough · Climate zone 8

Manual S Equipment Selection in Point Lay, AK for $100.

Manual S equipment selection for Point Lay, AK: we check your heat pump, AC or furnace against the Manual J loads using manufacturer performance data. $100 with Manual J and D included.

  • J + S + D for $100
  • Permit-ready PDF
  • 2–3 business days
  • No subscription
Newly built brick home with a finished driveway
Manual J + S + D · $100 per house

Free quote confirmation, no account needed. You pay per house, no subscription.

Point Lay at a glance

Load calculations for Point Lay.

8

Point Lay is in IECC climate zone 8 (subarctic).

Extreme heating loads with little or no cooling. Every envelope detail shows up in the result.

Climate zone by county (North Slope Borough) per the DOE / IECC county assignment. Your jurisdiction’s adopted code edition decides; we use the local design temperatures for the project address.

County
North Slope Borough
IECC climate zone
8
Area
28.5 sq mi

For projects in Point Lay you do not need a local office: send the plans by email and receive the Manual J, S or D as a PDF.

Population: US Census Bureau estimates. Point Lay is a community in North Slope Borough, Alaska.

Pricing

J, S & D for $100 in Point Lay. All three.

One price for every builder and every contractor, from the first house. No subscription, no software license, no minimum order.

Full permit set

Manual J + S + D

$100 / house

All three reports for one house, matched to each other, in one PDF package.

Order for $100
Load calculation

Manual J

✓ included

Room-by-room heating and cooling loads (sensible and latent) to ACCA Manual J 8th Edition.

Equipment selection

Manual S

✓ included

Checks the furnace, heat pump or AC you plan against the Manual J loads and manufacturer data.

Duct design

Manual D

✓ included

Duct sizing per room: airflow (CFM), supply and return sizes, friction rate and static pressure.

$100 per dwelling unit for all three reports, also if you need only one of them. Confirmed before we start. Unusual projects (very large custom homes, more than two systems) are quoted first.

What you get

A report your plan reviewer recognizes.

Every report is built from your actual plans and the design conditions for Point Lay, and delivered as one PDF you can upload with the permit application.

Room by roomHeating, sensible and latent cooling load and airflow for every room.
Code referencesPrepared to ACCA Manual J 8th Edition, Manual S and Manual D.
Matched equipmentManual S check against manufacturer data for the unit you plan.
Duct sizesManual D supply and return sizes, friction rate and static pressure.

Example screen with sample numbers (heating / cooling Btu/h per room). Your report uses your plans.

Why Manual J

Square feet per ton is not a calculation.

Two houses with the same floor area can need very different equipment. Windows, orientation, insulation, air leakage, duct location and climate change the load. Codes require ACCA Manual J and Manual S because rules of thumb usually oversize.

Order a Manual J for $100

Oversized equipment short-cyclesMore wear, more noise, worse humidity control and a higher price for the unit.
Undersized equipment falls behindRooms cannot hold temperature on the hottest and coldest days, and callbacks follow.
Plan review wants the reportIRC M1401.3 and IECC R403.7 require Manual S sizing based on Manual J loads.
Built for the trade

For builders and HVAC contractors in Point Lay.

We work as your back office for load calculations: you build and install, we deliver the numbers and the paperwork.

Row of new homes in a growing subdivision

Home builders & developers

  • Manual J, S and D with every permit set
  • Same $100 price for one house or a whole subdivision
  • Repeat plans: we keep your models on file
  • One contact for all your projects
New two-story home nearly finished on a construction site

HVAC contractors

  • Size equipment right and win the bid on facts
  • Load calc for replacement permits and rebates
  • Manual D before the duct crew starts
  • No software license, pay only when you have a job

Partner program

How it works

Manual J in Point Lay in three steps.

  1. Send your plansAnswer four questions, then email or upload floor plans, elevations, window schedule and insulation specs.
  2. We calculateManual J loads, Manual S equipment check and Manual D duct design, matched to each other.
  3. Permit-ready PDFDelivered in 2–3 business days. If plan review asks for changes to our report, we revise it free.
Builder and contractor reviewing construction plans
Your plansPDF, CAD or photos of the plan set are fine.
Floor plan with a pen and ruler
Room by roomEvery room, window and wall entered from the plans.
Roof trusses of a new house against a blue sky
Ready before rough-inEquipment and ducts sized before the crews start.
What we need

Send the plan set. We do the rest.

  • Floor plans of every level with dimensions
  • Elevations or the direction the front door faces
  • Window and door schedule (sizes, U-factor, SHGC)
  • Insulation levels: walls, ceiling/attic, floor, slab or basement
  • Ceiling heights and any vaulted areas
  • Duct location (attic, crawlspace, conditioned space)
  • Planned equipment type: heat pump, AC + furnace, mini-split
  • Air leakage target if known (ACH50)

Missing something? We tell you before we start and use code minimums only if you confirm.

Floor plan with a pen and ruler
FAQ

Manual S Equipment Selection in Point Lay, answered.

What does Manual S check?

Whether the equipment you plan delivers enough heating, sensible and latent cooling at local design conditions without being oversized beyond the Manual S limits, using the manufacturer’s expanded performance data.

Do you need to visit the site in Point Lay?

No. We work from your plans and specifications, so a project in Point Lay is handled remotely like any other. If a detail is missing, we ask before we start.

What climate zone is Point Lay in?

Point Lay is in North Slope Borough, which is assigned to IECC climate zone 8. Your local building department’s adopted code edition is what counts, and we use the design temperatures for the project location.

How much does a Manual J cost?

$100 per house for Manual J, Manual S and Manual D together. No subscription and no minimum order.

How fast do I get the report?

Usually 2–3 business days after we receive complete plans and specs.

Will the building department accept it?

Reports follow ACCA Manual J 8th Edition, Manual S and Manual D and use the plans you send. Acceptance is up to your building department; if plan review asks for corrections to our report, we revise it at no charge.

Do you work with builders and contractors on many houses?

Yes. Builders and HVAC contractors are our main customers. The price stays $100 per house for J, S and D, and repeat plans are kept on file.

Sunny suburban street with new homes

Your next permit, sized right.

Manual J, S and D together for $100 in Point Lay. Send the plans today.

Order now
More in Point Lay

Other services in Point Lay.

Manual S Equipment Selection in all of Alaska →

Order J + S + D · $100 →